GeoBrakes stocks disc brake caliper kits confirmed to fit the Ford Transit 350, pairing a replacement caliper at the correct left or right hand specification for the Transit 350 with matched brake pads, caliper hardware, and in many cases a new rotor, so the entire brake corner on your Ford Transit 350 is restored in a single service. Every kit is confirmed for the Ford Transit 350 exact year, make, model, axle, and side, ships with a 100% fitment guarantee and full manufacturer warranty, and qualifies for free delivery on orders over $99.
Standard/OECA $279.00
10 items in stock
Select your vehicle to see compatible products and accurate pricing
When a caliper on the Ford Transit 350 seizes, leaks, or drags, the damage does not stop at the caliper. A partially seized caliper on your Transit 350 keeps the brake pad in continuous contact with the rotor, wearing the pad unevenly and scoring the rotor surface. By the time the caliper on the Ford Transit 350 is identified as the fault, the pads are typically worn asymmetrically and the rotor is damaged. A caliper kit from GeoBrakes addresses every compromised component on your Ford Transit 350 together.
The kit for your Ford Transit 350 includes the disc brake caliper at the correct left or right hand specification for the Transit 350, either new OEM-spec or quality remanufactured to the Ford Transit 350 piston dimension and hydraulic pressure rating, brake pads in ceramic or semi-metallic formulation matched to the Transit 350 caliper and rotor specification, caliper hardware with slide pins, pin boots, and anti-rattle clips for correct caliper float on the Ford Transit 350, brake lubricant for correct pin and shim installation on your Transit 350, and copper washers or banjo bolt seals for the brake hose connection where required by the Ford Transit 350 application.
A caliper kit is the right call for the Ford Transit 350 in three specific situations. After a seized or dragging caliper, because the pads and often the rotor on your Transit 350 are already compromised. During a high-mileage Transit 350 overhaul at 150,000 kilometres or more, because caliper piston seals and guide pin boots on the Ford Transit 350 are typically at or beyond their service life. After a brake fluid leak at the caliper, because fluid contamination of the Transit 350 brake pad renders the friction material permanently ineffective on your Ford Transit 350.
New OEM-specification calipers for the Ford Transit 350 are manufactured from fresh materials with no prior service history, the strongest choice for Transit 350 vehicles in high-corrosion environments. Remanufactured calipers use original Ford Transit 350 housings rebuilt with new pistons, seals, and boots, performing identically to new units at a lower price point for most Transit 350 replacement applications.
Calipers for the Ford Transit 350 are the most position-specific brake component in the catalogue. Left and right calipers for the Transit 350 are not interchangeable. Our vehicle selector confirms the correct caliper kit for the Ford Transit 350 exact year, axle position, and left or right side before purchase.
Should I replace both calipers on my Ford Transit 350 at the same time?
It is strongly recommended. If one caliper on the Ford Transit 350 has seized or leaked, the caliper on the opposite side has experienced the same conditions and age on your Transit 350. Replacing both restores balanced, even braking and eliminates the risk of the second Transit 350 caliper failing shortly after the first is replaced.
Do I need to bleed the brakes on my Ford Transit 350 after installing a caliper kit?
Yes. Opening the hydraulic circuit on the Ford Transit 350 to install the new caliper allows air to enter. After installation, the brake circuit on the Transit 350 must be bled at the caliper bleeder screw to purge all air and restore a firm, consistent brake pedal on your Ford Transit 350.
What is the difference between a new and remanufactured caliper in the Ford Transit 350 kit?
A new caliper for the Ford Transit 350 has no prior service history and is the stronger choice for high-corrosion environments. A remanufactured caliper uses an original Transit 350 housing rebuilt with new pistons, seals, and boots, performing identically to new at a lower price point for most Ford Transit 350 applications.